Frequently asked questions
In the temperature section of the industrial refrigerator, it should reach 5 degrees above zero to 7 degrees above zero, otherwise the products will start to spoil after a few days.
Generally, in these situations, the compressor overloads due to the increase in the amperage consumption of the compressor. If the capacitor is replaced, if the problem is not solved, the compressor needs to be repaired or replaced, which is expensive, and the reason is generally electricity fluctuations and electrical problems.
After washing the circuit with nitrogen and weighing and changing the dryer filter, if necessary, you should completely vacuum the circuit and fill the gas and freeze it. The amount of charge in the devices is different and compared to your gas, and the type of gas for charging gas is 404 and 401 gas. and 22 above and in 134 and 12
All the topping bun-marie, which is where your items are placed on the topping, should be in place, even if the bun-marie is empty, leave it so that air penetrates under them less and the cold stays safe.
Usually, the industrial refrigerator compressor varies from 1/2, 3/4, 1 horse and 1/5 horse for high capacity freezers.
Contact us for advice
Addresses and phone numbers of the showroom and factory:
Central showroom: No. 70, next to Sepe Bank, in front of 6th Nirohovai Street, Pirizi St., Tehran
Factory: Imam Reza Highway, near Farun Abad, Kaveh Industrial Town, Abbas Abad Road, 2 Yas St.